Ozone Analyzer

SciGenePeriodically Measure Lab and NoZone Enclosure Ozone Levels

An Affordable Way to Measure Ozone Levels
Ozone levels as low as 20 ppb negatively affect microarray results (1). The most reliable way to measure ozone at these low levels is to use an ozone analyzer that employs the UV photometric method of measurement. However, high performance ozone analyzers that measure in the ppb range are expensive. Also, only periodic measurements of ozone levels in the lab or within a NoZone Enclosure are normally needed.

AlphaMetrix has an affordable solution. Instead of purchasing an instrument that is used infrequently, AlphaMetrix offers to laboratories the ability to get a service for monitoring the ozone concentration with the 49i Ozone Analyzer (Thermo Electron). This model is approved for use by the FDA for continuous monitoring of ambient levels of ozone in the low ppb range. It is perfectly suited for accurately measuring ozone levels in the lab and validating the performance of SciGene NoZone Workspaces.

Validate NoZone Workspace Performance
SciGene recommends that the ozone levels of the NoZone Workspace be measured during initial set up of the NoZone Workspace and then annually when seasonal levels of ozone are high, to ensure the ozone scrubber is working properly and that the enclosure remains well sealed. The Ozone Analyzer can be rented on these occasions to measure ozone levels in both the lab and NoZone enclosure as ozone levels.

Periodically Measure Lab and NoZone Enclosure Ozone Levels
The ozone analyzer is calibrated from the factory to give accurate ozone levels without further adjustment. Ozone data with date and time will be streamed to a computer via an Ethernet connection. A final qualification documentation is delivered.

Technical data:

Dimensions: (HxWxD) 9x17x23 inches (23x43x58cm)
Weight: Net 55 lbs (25kg) Gross 60 lbs (27kg), in shipping container
Power: 220V
Precision: 1.0 ppb
Drift: <1.0ppb/day
Sensitivity: 0.50 ppb
Linearity: +/- 1% full scale

Ozone Analyzer (Service Only)

Featured products and services

Precellys®EvolutionPrecellys®Evolution
The Precellys Evolution has the capability to process 4 different sizes of tubes and up to 24 tubes simultaneously. Its flexibility and high efficiency gives users the ability to grind, homogenize or lyse any type of soft or hard sample from animal, human, plant or microorganism, in about 30 seconds. Read more »

Precellys 24Precellys 24
The Precellys 24 is a highly efficient rapid cell lysis and homogenising instrument designed to liberate DNA, RNA and proteins from a wide range of specimens. Utilising a bead beating process coupled with a powerful figure of 8 motion allows lysis to be achived with very short programs typically less than one minute. Read more »

 Homogenisation tubes
For automated lysis Stretton Scientific offer a range of pre-filled homogenisation consumables. The pre-filled sterilised tubes are supplied with a range of grinding media selected to optimise applications. The beads range from 2.8mm steel beads for highly resistant tissue such as bone and hair down to 0.1mm glass beads for bacteria,spores and yeast. Read more »