NoZone® Ozone Scrubber

SciGeneMaintains Low Ozone Levels Within a Sealed Workspace

The NoZone® Ozone Scrubber operates by forcing room air through a bed of proprietary catalyst that converts ozone (O3) into oxygen (O2) and carbon dioxide (CO2). Any dust or other particles in the ozone depleted air that emerge from the catalyst cartridge is then removed by a HEPA filter before exiting the unit. Under normal atmospheric conditions of temperature, humidity and ozone, the catalyst used in the scrubber need not be regenerated or replaced during the lifetime of the unit.

Using the NoZone Ozone Scrubber
The NoZone Ozone Scrubber balances flow rate and ozone destruction efficiency to maintain ozone levels below 5 parts per billion (ppb) within a NoZone Enclosure or other similarly sealed volume of 20 cubic feet or less. It should be set up to operate externally to the enclosure with ozone depleted, filtered air being continuously pumped from the scrubber into one side of the space with an exit port opposite. The scrubber comes equipped with ducting and clamps to ensure a tight seal with the air flow vent on the enclosure.

Ozone levels within the enclosure should be periodically checked with a sensitive (ppb) ozone monitor. SciGene offers a high performance ozone analyzer for short-term rental (Cat. #1090-40-1) for this purpose.

Quickly Achieve and Maintain Low Ozone Levels
The NoZone Ozone Scrubber quickly achieves and maintains low (< 5 ppb) ozone levels within a NoZone Enclosure, even during periods of high (75 to 100 ppb) laboratory ozone. The ozone-safe environment created by the scrubber can be used for operating microarray processing and scanning equipment and for storing arrays.

Technical data:

Dimensions: (HxWxD) 22x5x5 inches (54x13x13cm)
Weight: Net 8 lbs (4kg) Gross 15 lbs (7kg), in shipping container
Power: 220V AC, 50/60 Hz, 40W
Fuse: 1.5 amp
Flow Rate: 25 to 30 cubic feet per minute

NoZone Ozone Scrubber

Featured products and services

Precellys®EvolutionPrecellys®Evolution
The Precellys Evolution has the capability to process 4 different sizes of tubes and up to 24 tubes simultaneously. Its flexibility and high efficiency gives users the ability to grind, homogenize or lyse any type of soft or hard sample from animal, human, plant or microorganism, in about 30 seconds. Read more »

Precellys 24Precellys 24
The Precellys 24 is a highly efficient rapid cell lysis and homogenising instrument designed to liberate DNA, RNA and proteins from a wide range of specimens. Utilising a bead beating process coupled with a powerful figure of 8 motion allows lysis to be achived with very short programs typically less than one minute. Read more »

 Homogenisation tubes
For automated lysis Stretton Scientific offer a range of pre-filled homogenisation consumables. The pre-filled sterilised tubes are supplied with a range of grinding media selected to optimise applications. The beads range from 2.8mm steel beads for highly resistant tissue such as bone and hair down to 0.1mm glass beads for bacteria,spores and yeast. Read more »